10 Clever Ways to Re-Purpose Your Furniture

They say ‘one man’s trash is some other guy’s treasure’ and that’s true, but that does not imply you cannot take your personal junk and make it a treasure over again. By reusing your antique furnishings, you can upload some exceptional appeal to your house d├ęcor. Not simplest that however being able to re-motive furniture is truely quite a few fun. From cabinets to dressers to antique doors to countertops, some thing can be repurposed. All it takes is only a little creativity. So, the subsequent time you are geared up to throw away that vintage facet desk that you’ve been preserving directly to for years, take a look at those 12 clever methods to repurpose your fixtures earlier than you do. You would possibly get a touch proposal.

1. Use an old door as a headboard

If you have got an antique wood door just lying round why not attempt repurposing it as a headboard to your bed. By sanding down any difficult edges, your bed could have an delivered rustic aptitude. Plus, it’s certainly easy to do. All you want is a sander (or simply sandpaper) and a chunk of putty.

2. A bookcase can become a bar
No concept what to do with that old antique bookshelf? The solution is simple: make a bar! By using the shelves to keep glasses, liquor, martini shakers, and perhaps multiple books, you’ll have a high-class bar right for your den, basement or dwelling room. Complete the appearance by adding wine holders and wine glass holders.

Three. Turn a window into a cabinet door
If you’ve got a window that’s intact with lots of character however too antique to really use, then strive creating a cabinet door out of it. You can both make a cupboard or locate one with out a door. Either manner, connect a handle and hinges to the window, attach it to the cabinet, and you are executed. Simple and easy.

4. A cloth wardrobe into a bench
Do you’ve got an vintage dresser which you cannot find any use for? Just turn it right into a bench. A bit of slicing, sawing, and screwing and you’ll have a pleasing seat for one or . If you seal and paint it with exterior merchandise you may even region it out of doors.

5. A buffet cupboard turns into a espresso station
Turning a buffet cabinet right into a espresso station is the perfect component to do. All you have to do is do away with the pinnacle of the cupboard and update it with a kitchen countertop. This will look top notch in the kitchen as a espresso station. Put your mugs, espresso maker, and cream and sugar right here for a high-class appearance.

6. Turn a chair into a nightstand
Do you’ve got a chair you adore but it doesn’t suit your different chairs? Turn it right into a nightstand or (if it is massive sufficient) a table. All you need to do is take off the back and simply use the seat.

7. Turn antique aspect tables into stools
A nightstand or facet desk can be without difficulty converted into a stool via sincerely including a cushion to the top. This is in particular beneficial when you have lots of aspect tables for some cause.

Eight. An easel will become a TV stand
A massive and heavy-obligation artist’s easel can without difficulty turn out to be a TV stand if it’s sturdy enough. Plus, it adds an thrilling dimension on your living room and is a outstanding verbal exchange piece. Just place the TV on the lowest shelf and convey the pinnacle one down as in case you were propping up a canvas.

9. Turn a secretary table into a linen cabinet
Secretary desks, in particular those with a tall hutch, can be repainted and located within the bathroom or hallway as a linen cupboard. Best of all, there’s slightly any fussing required.

10. A chest becomes a espresso desk
If you have got a heavy duty timber chest or trunk this is the right peak, then you can without problems flip it into a coffee desk. Just use a sealer at the pinnacle or location a pane of glass. If you are truely accessible with gear you could make the top open up like a garage door.

Posted in Architecture and Design | Comments Off on 10 Clever Ways to Re-Purpose Your Furniture

How To Level A Floor Before Tiling

Are you making plans on putting in a brand new tiled floor? If so then it is crucial to make it flat as possible. Tiled floors look lovely. On the opposite hand a sloppy task can come to be looking horrible, and creating plenty greater give you the results you want. Not to say the value involved will extra than double if you turn out to be having to redo it.

Firstly you need to ensure your floor can take the weight of tiles with a view to lay on it. Concrete flooring are more likely to be robust, which lead them to ideal. However, you have to nevertheless take a look at to look if it’s miles degree. We recommend a self-leveling concrete to get a great degree floor.

Before starting your ground levelling venture, it is vital that you have the right equipment, substances and techniques available. Ensure you have the subsequent before beginning this venture:

Floor leveling compound
A Four-foot degree Nylon String
A Trowel
A Drill and Mixing bucket
A Five-gallon bucket

Step 1

Identify the high and low spots by way of using a stage. Mark out any low spots using a pencil by using drawing huge circles around them.

Step 2

Mix up a few floor leveler inside the bucket (in line with the levelling compound commands). Usually this involves a bucket being filled with two inches of water. You then pour in sufficient levelling compound to cover it. You then blend the compound with the water till you have got a steady texture. The levelling compound instruction will let you know the water to powder ratio. Remember that your weather can change how nicely your levelling compound mixes. You may additionally should make changes.

Step three

Keep adding levelling compound and water until you have a full gallon combination. The combination have to have the consistency of the skinny soup.

Step 4

Pour your mixed levelling compound batch over low spots which you marked earlier. Always work your manner out from the nook, furthest from the door. Give it time to settle and level out earlier than pouring more. Use your trowel to flatten any spots wherein the leveler does not flatten itself.

Step five

Fill inside the remaining low spots even as chickening out the room as you cross. Let it set for at the least 24 hours. You are then geared up on your next step, that is tiling the ground.

Tiling Your Perfectly Flat Floor

Floor levelling compounds are fast curing. This manner you want to paintings speedy before it dries. Some may even be walked on within three hours. However, it is encouraged you leave you new floor for as a minimum 24 hours to be sure the coating has cured sufficiently.

Before installing tiles, take a look at the surface of your ground cautiously to make sure that it is perfectly clean and loose from defects. Things to appearance out for is irregularities, water damage, or vulnerable joists.

Posted in Architecture and Design | Comments Off on How To Level A Floor Before Tiling

Make Your Concrete Floors A Work Of Art

Concrete foundations are crucial for almost each type of constructing. There are several exclusive types of slabs which can be used to make the inspiration of your constructing. Fortunately, these do now not should be dull and boring. Much like polished concrete, with a dash of color here and there, you may without problems turn your own flooring into a work of art.

Read on to discover everything you want to realize approximately coloring concrete foundations.

Preparation

Before you try to add coloration or make styles on your cement flooring, it’s far extremely vital to understand whether or not your challenge can be capable of face up to the changes which you want to make. This approach that your concrete slab wishes to be intact before you can begin designing it.

Since seams and crevices for your floors can almost wreck the design, it is important to restore your cement flooring earlier than you try to personalize it. It is likewise critical to realize which you can’t paint a concrete floor until it’s miles cured. Therefore, if you have a cement slab which was lately built and mounted, it’s miles necessary to attend at least four weeks earlier than you can begin painting it.

New concrete systems need to additionally be left to dry out evidently without the use of any curing chemical substances. Since the addition of chemical compounds and different drying marketers can motive problems during staining, if you wish to layout and customise your home, it is quality to go away the concrete surface to dry naturally although it takes a bit longer than four weeks. Once the concrete has dried, acrylic fillers have to be used to fill any cracks in the cement slab.

Once the concrete has dried and has been repaired, the following step is to thoroughly easy the entire floor earlier than you paint it. Since it’s miles very clean and commonplace for dust and other contaminants to get stuck into it, you ought to use a strength washer for exterior surfaces. An extra cleansing agent might be required for the interior.

Painting

The roller which you may be using to color it, needs to be wiped clean to ensure that the quit result does no longer have any blemishes or different contaminants like dirt. When you start painting it, a paint brush should be used to color the grooves of the concrete. Initially, it’d seem like a number of paint is needed to color your surface, but that is handiest because a whole lot of the paint might be absorbed through the concrete.

Once the primary coat has dried, you could then upload next coats of stain relying for your required shade and end. In case you want to use textured paint to it, you may need to use a primer earlier than you may begin making use of to stain. If a primer is not used ahead when applying textured paint, it’s miles very possibly that the cease end result will not be as proper as anticipated. With the new surface, concrete foundations typically mimic the modern appearance of herbal stone.

Posted in Architecture and Design | Comments Off on Make Your Concrete Floors A Work Of Art

Guide to Burning Tree Stumps

If you are seeking out an inexpensive and clean way to put off vintage tree stumps, you have to don’t forget burning them down. This approach is a totally popular manner to get rid of tree stumps without using any essential device or gear. Furthermore, the fee is extensively decrease than professional stump elimination or stump grinding carrier given that all you need are a few over-the-counter, store-offered merchandise. You can count on to spend everywhere from $20 to $100, relying on the dimensions and amount of the tree stumps. Additional equipment can be required as well, such as a energy drill with wood-uninteresting bit, a gardening spade, compost, and greater. Continue below to see what you may need this unique technique of stump removal.

How to Burn a Tree Stump

This approach isn’t endorsed for each person that doesn’t have experience working with open flames and fire. It is also by no means advocated for areas that are dry or combustible. If you do select to burn your tree stumps, it is important to apply strict inner safety standards. Learn what those are before getting began.

You have to also ask your local hearth department approximately the nearby ordinances for burning tree stumps. A allow can be required in your network, or it is able to not be allowed at all. Also, potassium nitrate is a relatively-explosive chemical, so there can be bans, regulations, or garage regulations on your county.

What You Need:

Potassium Nitrate or Saltpeter
Dry Scrap Wood
Soil (optionally available)
Grass Seed (optionally available)
Power Drill
1-Inch Wood Boring Bit or Spade Bit
8-Inch or 10-Inch Bit Extender
Garden Trowel
Bucket
Funnel
Hot Water
Shovel
Matches

Directions:

After you’ve got checked along with your nearby fire department and city ordinances regarding fireplace use and burning tree stumps, you’re prepared to get started. Never try to burn anything outside at some point of a dry season or fireplace ban. This should result in devastating accidents and damages.

Here’s the way to get commenced:

Put your drill and drill bit together together with the bit extender. Fill your bucket with a gallon of warm water.

Starting on the top-middle of the stump, drill a hollow at a 30 diploma perspective and drill 10 inches deep.

Clean out the inner particles and keep to drill holes throughout the complete stump, starting from the center and ending at the edge. Keep holes 1 inch apart.

Posted in Architecture and Design | Comments Off on Guide to Burning Tree Stumps

How To Board Your Loft Guide

Boarding out your own loft may be a daunting task.

This article offers you with the entirety you want to realize approximately boarding out lofts. Details are also furnished about insulation requirements whilst boarding out your loft space.

Why board out your loft?

It is a notable way of gaining extra storage space within your property.
Boarding a loft makes it easier to get right of entry to heating pipes and electric connections. But most effective if forums are laid out carefully adjacent to the pipes.
It makes your loft a safer vicinity. Once boarded you’ll not should fear about by accident falling thru your ceiling. You can also flow round heavy packing containers with out constantly watching where you are treading.

Things to remember when boarding out your loft

It is essential to don’t forget the sort of insulation you will install, and what kind of.
Ensure clean access to pipes and electrical cables while boarding your loft. Ideally board round pipes and cable if you could. If there may be a leak or electrical fault, you want to make sure get admission to is possible.
Consider how you’ll access your loft. Loft floors is typically raised in recent times because of thicker insulation being used. However, you do not need your floor raised an excessive amount of around the loft get admission to region. This will make it less difficult so as to get admission to your loft thru the step ladder.

How to board your loft – Step by step manual:

What’s wished?

Loft legs. These are plastic legs approximately 175mm in length. Loft boards are then screwed on top of those legs. It is essential to raise the peak of your loft floor as thicker insulation necessities are wanted.
Loft tongue and groove boards.
Loft board screws.
Drill with Pozi drive (permits rapid screwing)

Safety wear

Quality dust mask.
Goggles.
Disposable paper match.

Step 1 – Location and size of loft boarding:

Decide whether or no longer the whole loft needs to be boarded.
Usually humans best require a small storage space inside the loft.
Large regions of loft boarding can be very highly-priced.
Try to location your loft boarding near the loft hatch.
Choose an area in which there are not any water pipes, or some thing else you can want get admission to too. If you board over such matters it is going to be difficult to attain it.
Loft legs raise your loft ground through 175mm, they can be purchased from neighborhood DIY stores. Therefore you can need to put in a decrease ground subsequent in your loft front. This is normally finished be putting timber at once on top of the joists.

Step 2 – Insulation height:

Insulation requirements for homes have improved over the previous few a long time. Most older houses have an insulation thickness of 100mm simplest, among the joists. Loft boards have been truly laid on top of the joists then screwed in.
Current insulation requirements endorsed via the Energy Saving Trust are 270mm. This parent is based totally on glass fibre wool insulation.

Step 3 – Insulation kinds:

There are many kinds of insulation out there, all having specific properties. The most commonplace type is glass fibre. However, you may use PIR insulation forums. PIR foam board is more effective then glass wool by using a element of two. This approach 100mm of PIR board is equal to 200mm of glass fibre wool.
Usually clients go for preferred glass fibre insulation because of its price effectiveness.

Posted in Architecture and Design | Comments Off on How To Board Your Loft Guide

Unique Ethnic Home Decor Options To Brighten

Key holders

Fed up of attempting to find the keys each time you need to go out? Organize your keys in lovable hand crafted key holders. These hand embroidered and gadget embroidered key racks will no longer best save time and frustration when you are in a rush however may also upload a creative detail to your home.

Coasters

Are you always involved about juice stains or espresso stains to your treasured glass or timber crowned tables? Protect them with coasters which might be functional in addition to extremely attractive to the eye. From incredible coasters embroidered with pearls and sequins on dupion silk to the adorable and colourful ones embroidered with floral styles, tribal designs, and summary arts, the selection you have is actually captivating. Get some sets and upload a brand new beauty for your tables on every occasion you entertain.

Picture frames

Happy pics of circle of relatives redecorating the walls and side tables of a domestic is a fantastic manner of making a fantastic environment and boosting appropriate mood. So, why not do it in style? Choose from a number handmade picture frames to be had in one-of-a-kind sizes and styles. Embroidered frames encased in dupion silk fabric frames sequined with gold embellishments and gold zari paintings is just some of the alternatives you have got. These are wonderful alternatives to beautify your home in addition to to gift loved ones.

Serving Trays

Think beyond the run of the mill ceramic and porcelain trays. Equip your kitchen cupboard with beautiful timber trays embellished with embroidered Warli artwork and other ethnic tribal designs. The metal handles add a hint of present day beauty to the ethnic design. The excellent component approximately those trays is that they’re multi-purposeful. When you aren’t serving tea and biscuits in those trays, hang them up a wall and they make a outstanding wall hanging!

Table lamps

Embroidered table lamps can immediately jazz up your space with classic elegance. Available in extraordinary colors and a massive variety of embroidery styles, these lamps are designed to strike a adorable delicate stability among traditional ethnic appeal and modern simplicity.

Cushions

Fabrics have a very calming impact in a space. You can use them to instantly alternate the person and environment of a room. Bright coloured cushions with lively embroidery and sequins can create a dramatic effect while pastel cushions with soothing designs can convey a experience of peace and calm in a space. Have a set for every event. Choose hand embroidered or device embroidered cushions in bright shades and an array of cloth varieties.

Posted in Architecture and Design | Comments Off on Unique Ethnic Home Decor Options To Brighten

How to Create Your Own Perfume or Cologne

Do you need to make your own signature fragrance or cologne heady scent? Or maybe you are seeking out particular selfmade present ideas for friends, circle of relatives or maybe co-people.

You can make your very personal interesting scents with ingredients from the grocery save. Even nature itself can offer critical components for this formidable and fun assignment. Why spend a fortune on fragrance or cologne whilst you may make your own for a long way less then it’d be at shops specializing on this product?

Brand name fragrance/cologne can fee from $50-200 and lots, a good deal more in case you keep at a excessive quit retailer. Why spend that plenty while you may create your own perfume which is personalized just for you and offers off the fragrance that fits your persona perfectly!

So, realize let’s undergo the manner in designing and creating your personal personalised perfume/cologne.

Know the different notes. Perfumes/colognes are a blend of various levels of fragrance, additionally called “notes”. When you spray a fragrance in your skin, it moves through these notes inside the following order:

Top notes are what you odor first. They also are what disappears first, usually within 10 to 15 mins
Middle notes seem as the top notes die off. These are the perfume’s core, figuring out which family the scent belongs to – as an example, oriental, woody, fresh, or floral
Base notes intensify and attach the perfume’s center notes, also called its theme. They comprise the perfume’s basis, making the fragrance last up to 4 or five hours for your skin

-Familiarize yourself with famous top notes.

Popular pinnacle notes consist of basil, bergamot, grapefruit, lavender, lemon, lime, mint, neroli, rosemary, and sweet orange.

-Familiarize your self with popular middle notes

These include black pepper, cardamom, chamomile, cinnamon, clove, fir needle, jasmine, juniper, lemongrass, neroli, nutmeg, rose, rosewood, and ylang-ylang.

– Familiarize your self with famous base notes

These include cedarwood, cypress, ginger, patchouli, pine, sandalwood, vanilla, and vetiver.

– Know the ratios

When mixing a fragrance, first upload your base notes, then your center notes, then eventually, your top notes. The ideal ratio for blending notes is 30% top notes, 50% middle notes, and 20% base notes. Some humans advise combining a most of three to 4 dominant notes

Posted in Architecture and Design | Comments Off on How to Create Your Own Perfume or Cologne

DIY Steps To Protect Patio and Outdoor Furniture

Though the outdoor furnishings is made from All-climate substances, however one has to behave wisely to lengthen the existence of it. Don’t leave the whole thing to manufacturer’s hand as they are not give up users. This article sheds some light on the safety of the furniture. Follow the underneath indexed steps to improve the software of the furniture.

Step 1:

Generally the patio furniture is uncovered to all forms of the pollutants. So brush them to get rid of the dirt.

Check for any damages. If any, clean the difficulty. Otherwise your efforts will run in vain.

Separate upholstery and body of the furniture piece as they should be wiped clean separately.

But wicker furniture is altogether extraordinary. They have to be protected with hose. Wooden and metal furniture may be wiped clean with a sponge.

To ease the cleansing procedure, use a cleansing solution which is particular to the cloth you’re the use of.

Step 2:

Upholstery protection- The upholstery of the out of doors fixtures is sensitive. Fabric upholstery wishes a bit greater protection. The upholstery defines the splendor of the furniture. So it need to be washed well to shed its gloomy appearance. After washing, it must be dried nicely to keep away from mold. If there’s less sunlight, then use electric powered dryers. Dry it till moisture degree reaches 0. Then follow a cloth protector which doesn’t have an effect on the nature of the material. It have to be sprayed seasonally to all the cloth portions to increase the life.

Step 3:

Frame safety- As it is said within the first step, the body need to be dealt separately.

UV radiation from the sun and rain are primary reasons of harm. Look for an Outdoor fixtures protector which negates the bad effects of weather. It can be applied to plastic and steel furnishings frames with a paint brush.

For timber frames, follow a regular paint. Pigments in the paint can defend furniture from warmth and water. The wood body need to be painted periodically because the paint at the frame has a tendency to chip and wither.

The protector need to be carried out in a ventilated location via the usage of masks and gloves to keep away from any untoward incidents.

Step 4:

Make them resistant in opposition to stains and water- A small stain can damage the enchantment of the furnishings. So, apply a stain and water repellant for each years. The water repellant prevents the water from accomplishing the lowest layers of the wooden and also fastens the evaporation procedure. Avoid the use of repellents, which have a excessive oil content material.

Posted in Architecture and Design | Comments Off on DIY Steps To Protect Patio and Outdoor Furniture

Using Stainless Steel in Coastal Areas

Well the simple answer isn’t any, no longer simply. Coastal regions are one of the harshest environments with excessive tiers of airborne salt, excessive winds and plentiful seagull presents that once applied to stainless-steel products will begin to devour away on the surface and tarnish the end if no longer regularly maintained.

Are there exceptional types of stainless that may be used?

Absolutely. The principal component to make sure is that your supplier is the usage of G316 chrome steel (marine grade) and now not G304 fabric that should handiest be used internally.

There are most important surface finishes of stainless-steel; satin (brushed) and replicate (brilliant) polished.

The satin finish stainless material has a brushed ‘grain’ for you to gather salt and contaminants that can start to deteriorate the metallic. Satin polished stainless steel can absolutely be utilized by the coast, as lots of our clients do, however honestly requires a higher level of ongoing cleaning and renovation.

Mirror polished stainless but is a clean end, with out a grain, that gives more safety towards the coastal elements. The replicate polished alternative is greater highly-priced but might require much less protection than a brushed end opportunity.

Will stainless material rust in coastal areas?

Stainless metal depends on its passive layer for corrosion resistance. This is a thin chromium oxide layer formed on its surface while chromium is present at 10.5% or above. The underlying steel isn’t corrosion resistant. The passive layer forms spontaneously on a clean surface however can be damaged with the aid of iron contamination, airborne debris and specifically chlorides.

Therefore, it’s far vital that stainless metal is difficulty to an ongoing protection and cleaning program. Remember it’s far stainLESS, no longer stainFREE.
What form of cleaning merchandise should be used?

The most important recognition is to smooth off any salt and contaminants from the surface of the metal which may be carried out with any primary cleaning agent, which include soapy water. More sophisticated, expert merchandise are to be had for the cleaning of stainless-steel but may also simplest be required if the tea-staining is huge-unfold or stubborn to eliminate.

The primary rule is simple, look after the stainless-steel with regular cleansing as prevention is continually less complicated (and less expensive) than the remedy.

So could you recommend against the use of stainless metals by way of the ocean?

No, under no circumstances. If budget lets in, opt for a reflect polished finish but the predominant piece of statistics to be gained right here is that you can’t in reality buy a stainless product and go away it in area, in particular in coastal areas without cleaning it – Just clean it down as frequently as you smooth your home windows and doorways. Look after your chrome steel and it’s going to appearance extremely good for decades to come back.

Posted in Architecture and Design | Comments Off on Using Stainless Steel in Coastal Areas

DIY Timber Decking Materials & Timber to Use

Are you trying to construct your personal timber deck in Australia? Below, you’ll find recommendation and pointers from an skilled deck builder with regard to what timbers and hardware you may pick from to construct your new wood deck.

TIMBER SUPPLIES

There are many Australian and Imported timbers to pick from whilst building your new deck or outdoor structure. When choosing what wooden and substances to apply you should don’t forget the weather, what the shape may be used for, the size of the location and the surrounding structures.

Spotted Gum

Spotted Gum is a very difficult wooden and is consequently used in many large commercial projects and programs. It has a high durability score against pests and is sourced from the Eastern States of Australia.

Blackbutt

Blackbutt is a hardwood this is also sourced from the Eastern States of Australia. It can reason issues in areas with full sunlight and therefore should be frequently sealed. Blackbutt is typically mild in shade.

Jarrah

Jarrah is ideal for hot and vicious climates inclusive of Western Australia, the Northern Territory and Queensland. It is typically greater high priced than other timbers despite the fact that is quite popular because of the huge range of colors and a high durability rating. Jarrah will carry out nice in areas with cover from the rain.

Merbau

Merbau wooden is normally extra low priced than maximum different timbers on the market. It additionally proof against rot and termites, and whether sealed or not it flourishes in just about any weather.

Composite Timber

Composite is a synthetic wood built from a combination of plastics and recycled timber. There are some of special manufacturers in the marketplace and every one differs barely. Note that no longer all composites are perfect to warm climates so ensure which you communicate with an professional earlier than deciding on a composite timber.

Treated Pine

Treated Pine is Pine that has been treated with a chemical mixture that provides resistance to pests and rot. It is to be had in a variety of durability rankings so make sure you test with the manufacturer before making a spread.

Recycled Timber

Recycled timber is used timber which has been salvaged from vintage or replaced timber structures. The wood is rejuvenated so it seems like new. Additionally, it’s far environmentally pleasant and may be unique in aesthetics.

Posted in Architecture and Design | Comments Off on DIY Timber Decking Materials & Timber to Use